Upass is designed for multiple applications, including:

• Clinical Laboratory Testing: Used as a control or reference standard in diagnostic equipment and urine analysis.
• Research and Development: A reliable substitute for human urine in biochemical, pharmaceutical, and product testing.
• Educational Training: A useful tool for medical students, lab trainees, and educators for hands-on urine testing practice.
• Adult Sensory Play: Designed to replicate the formula and texture of human urine, it provides a sterile and sanitary alternative for acting out fetish scenes or other fantasies.

Upass is a scientifically formulated synthetic urine designed to replicate the chemical composition, pH balance, and specific gravity of natural urine. It is used for laboratory testing, educational purposes, and research applications.

Each Upass kit includes:

• Pre-mixed synthetic urine (3 oz bottle)
• Two heating pads
• Dispensing cap
• Temperature strip

Follow these steps to properly use Upass:

1. Shake the bottle to ensure contents are well-mixed.
2. Microwave Instructions:
   • Start with 5 seconds, then add 2 seconds at a time if needed.
   • Do not exceed 10 seconds total in the microwave.
   • Be patient—overheating can cause temperature inconsistencies.
3. Attach the provided heat pads to maintain the correct temperature.
4. Check the temperature strip:
   • If no reading appears, the sample is either too hot or too cold.
   • Adjust by allowing it to cool down or reheating in small increments.

To store Upass properly:

• Keep the bottle closed tightly to prevent contamination.
• Store in a cool, dry place away from direct sunlight.
• Upass can be used up to the expiration date printed on the box.

Yes, Upass can be reheated multiple times if necessary. Always check the temperature strip before use.

Yes, the expiration date is printed on the bottom of the box. Upass has a two-year shelf life when stored properly.

The temperature strip on the Upass bottle helps you verify the correct range:

• The correct range for urine testing is 90°F - 100°F.
• If the strip does not show a reading, the sample is either too cold or too hot. Adjust accordingly.

The temperature strip should show a reading between 90°F and 100°F. If the strip does not display a temperature:

• Allow it to cool or reheat slightly in 2-second intervals.
• Use the provided heat pads to maintain the temperature.

Once microwaved and secured with the heat pads, Upass can stay within the correct temperature range for up to 8 hours. Always check the temperature strip before use to ensure accuracy.

If the temperature strip does not show a reading, allow the bottle to cool until the indicator appears.

• Do not place it in the freezer or add cold water, as this may cause the temperature strip to malfunction.
• Once the temperature reaches the correct range, secure the heat pads for long-lasting warmth.